Unregistered users may browse the website, but in order to participate in the forums and view select pages (such as "Club Contacts" and "Classified Ads") a user account is required. Click HERE to email the webmaster and request a free account. The National DeSoto Club uses real names rather than pseudonyms. Notify the webmaster of your user name preference (Johnathon Doe vs. John Doe, etc.), preferred email address, and password request.
Last seen: February 26, 2026 9:29 am
The club does not have the same build cards that FCA does, so unfortunately that one you have to be patient on. For the model years that have been tra...
I have five right-hand lug bolts to sell. I am looking to get $25 plus shipping. If you are interested, you can email me directly at fireflite56@gmail...
Usually interior parts don't have specific paint names or codes, at least not that were ever shared by Chrysler Corporation to the public. Your best b...
You might try reaching out to Les Pesavento, the model year coordinator, to see if he can provide any input to those codes. I would also reach out to ...
Besides my suggestion in the Facebook group of seeing whether you could utilize the existing seat studs going into the floor, I would also recommend t...
Do you have a photo of the lens in question? You might also try contacting the 1950 coordinator, Ferd Driver. His phone number is (410) 329-6509 and h...
I know this post is a bit old, but many people have had luck rubbing ORIGINAL Gojo hand cleaner onto seals to soften them. It may take several applica...
Things are starting to come together! I am only waiting on the chrome to be finished at this point - everything else is on me. Since my last update, I...
5/11/2021 - We are officially proceeding with the convention as-planned, barring any severe changes in circumstances related to COVID in the next seve...
I don't know for sure, but I do know the heads are different part numbers '55-'56. I'll check to see if I have a '55 manifold here I can hold up again...
I am actually working on lubricating my cable and speedometer as well. The wick can be removed by laying under the dash and reaching up behind the clu...
I have been spending time restoring the gauge and gauge face colors. The needles were easy enough, using some Testor's model paint and a small brush. ...
@rogerhubbs believe it or not, I just used my fingernail to scrape. It was very slow and tedious, but I found it was hard enough to get the coating of...
In the past week, I took advantage of some warm weather here. I got the power steering box disconnected from the steering linkage and removed from the...
@fredroman that's what I thought you were looking for. Good luck in your search!