Tim. I can not figure out how to include pics. on this site (and I'm not the only one). Anyway I have a 2 piece mold and can certainly cast the 2nd ...

bigest problem might be old gas. Drain the tank, blow out the lines with air, refil with a couple gallons and instal an in-line filter and keep a spa...

I bought my Petronix set up for both the DeSoto and the Dodge from Mark Nikolay of Philbin rebuilt products of Portland,Or. info@philbingroup.com and...

thanks everybody and expecially Mark. dave

I reallay don't know of the advantage of dual points but I had a 55 dodge and now have a 55 desoto and installed petronix in both with excellent resul...

if your wheel is not completely shot but just cracked and missing chunks you can do a pretty decent job by cleaning it up and applying rust dr. to the...

Hey, George, where did you get that spectacular trunk liner? dave allard

I have enjoyed my 55 sportsman for about 8 years. I got tired of the slow starting so switched to an 8 volt battery and it works fine ( had to have ...

this is probably crazy but i've been looking at the new rustoleum spray can of black rubber stop leak that home depot is pushing; it looks heavy enou...

I loosened one rear drum once by loosening all the lugs about half way and jacking the car up and putting power to the rears in fwd, then rev. and jam...

Hey, Jason, where do you live. You need help on site. Your best bet is to join a couple car clubs..Plymouth, Dodge, chrysler etc that is close by. ...

thanks, Tim. Ps: I'm making a mold for the plastic emblem under the chrome V on the nose of the 55/56 desoto. If it turns out, I'll send you one. ...